Setanta

Journal

Digitizing the shop floor on your ERP.

Faster quotes, fewer wrong picks and certs found in seconds, using Claude on the system a steel service center already runs.

Gary O'Neill, founder and CEO of Setanta

Gary O'Neill, Founder & CEO, Setanta.
. Updated 7 min read

Share

Why the shop floor is the place to start

Walk into most steel service centers and the hardest working people in the building are not on a screen. They are the inside sales rep with a phone on one ear and three windows open, and the yard lead walking the racks with a clipboard.

The inside sales rep gets a request for plate in a certain grade and size. Before they can quote, they need to know if the material is in stock, which branch has it, whether a remnant would do, and whether the mill cert is on file. Often that means calling the yard, waiting, and then typing the same numbers into the quote by hand.

The yard lead, meanwhile, is hunting. The ERP says there is a bundle. The rack says otherwise. The cert is in a folder, or an inbox, or a scan nobody named. Every one of those hunts is a small delay. Across a day, they add up to hours.

That is why we start on the shop floor. The hours lost there are the hours your customers feel. We wrote about the quoting half of that morning in The inside sales rep's morning. This piece is about the yard and the systems behind it.

What paper and re-keying actually cost a steel service center

Owners rarely see "hours lost hunting for certs" on a report. They see what those hours turn into:

  • Slower quotes. A buyer sending the same request to three service centers often goes with whoever answers first with a confident price and availability. If your rep is waiting on the yard, you are not first.
  • Lost orders. Some of those slow quotes never become orders. You will not always know why, because the buyer just stops answering.
  • Wrong picks. When grade, size or finish is described three different ways across systems, the wrong bundle gets pulled. That means rework, a second truck, or a credit.
  • Remnants that never sell. Offcuts that are not recorded well sit on the rack while the rep quotes new material, because nobody can quickly prove the remnant fits.
  • Stock in the wrong branch. Multi-branch operators buy or transfer material they already own, because one branch cannot see the other clearly.

None is dramatic alone. Together, they are margin.

Why more service centers have not digitized the shop floor already

Usually not for lack of trying. Most have an ERP, some have barcode or yard tools, and many have tried a portal or two. The problem is underneath.

The data is messy. In our conversations with operators this year, the same issues keep coming up: duplicate SKUs, stock showing in the wrong branch, and grades described differently from one system to the next. When the words for the steel do not match, no tool on top will be reliable.

The other reason is fear of rip and replace. Nobody wants to stop shipping for months to install a new system. That fear is reasonable.

How Claude fits on top of the systems you already run

Claude is not a new ERP. It is a layer that can read what you already have, in plain English, and help your people act on it. The method we use is the same one we use in every engagement:

  1. Sit with the team. We spend time with the inside sales rep, the yard lead and the scheduler. We watch where the hours actually go before suggesting anything.
  2. Agree the definitions. Grade, size, finish, remnant, branch. One set of words, written down and agreed by the people who use them. This is often the most valuable step, and it needs no AI at all.
  3. Connect, read first. We connect Claude to your ERP and shop-floor data, starting read only. Some ERPs have connectors today; heavily customized ones may need one built. Either way, nothing gets replaced.
  4. Build one workflow. For example: a rep types "do we have this plate, where, and is the cert on file?" and gets an answer with the location and the cert attached, instead of calling the yard.
  5. Measure before and after. On that one workflow, so the owner can decide on real numbers, not promises.

Your people own what gets built. The goal is not to replace the yard lead. It is to give every rep and every yard lead the answers your best person carries in their head.

What a steel service center should digitize first

Pick the workflow where three things are true: it happens many times a day, the answer already exists somewhere in your systems, and a delay costs you an order. For most service centers that points to one of these:

  • Stock and location lookup for quoting. Answer availability and branch before the rep hangs up.
  • Cert retrieval. Find the mill cert for a heat or a bundle and attach it to the quote or the shipment.
  • Remnant matching. Check whether a recorded remnant fits a request before quoting new material.
  • Quote drafting. Pull the material, the price rules and the customer history into a draft the rep checks and sends.

Start with one. Get the definitions right. Then expand. Our RFQ to quote guide goes deeper on the quoting side, and our steel service centers page spells out how we think about the vertical.

Census data puts this in scale: across Setanta's five industrial verticals, the U.S. Census Bureau's 2022 SUSB file counts 4,717 firm entries with 100 to 499 employees, and 19,694 with 20 to 99. Of those, 293 of the mid-sized entries are metal service centers. We walked through that count in The industrial middle.

Where we stand

We want to be plain about one thing. We do not have a client in this vertical yet. Our approved proof today comes from insurance work with The Huneycutt Group (THG), an independent agency in Wilmington, NC. At THG, comparing 150-page policies went from days to minutes, and a client proposal went from 5 days to 5 minutes. That is insurance, and we say so. The method is the same one we would use here: sit with the team, agree the rules, and put Claude on top of what is already there.

As Chad Huneycutt, CEO of THG, put it: "Implementing Claude would have been a challenge I don't know that I would have been able to rise above without Setanta."

We are an Anthropic Partner. We work inside your systems, and we measure on your numbers. If you want to look at your own shop floor first, start with our free Operating Diagnostic. Scope and timing for a first workflow are scoped in the diagnostic.

Questions

Questions we hear

Do we need to replace our ERP to use Claude on the shop floor?

No. Claude sits on top of the ERP and shop-floor systems you already run. Where a direct connector does not exist, one can be built. Nothing has to be ripped out.

Is our data clean enough for AI?

Probably not fully, and that is normal. Duplicate SKUs and inconsistent grade descriptions are common. Agreeing definitions and cleaning the key fields is usually the first piece of work, before any AI goes live.

Will this replace our inside sales reps or yard leads?

That is not the aim. The aim is to give every rep and yard lead faster answers, so the way your best person works becomes how the whole floor works.

How long does a first workflow take?

It depends on your systems and data. A first Build is one end-to-end process connected to your systems, with a before and after measurement. Duration is scoped in the diagnostic.

Gary O'Neill

Gary O'Neill is the founder of Setanta, an Anthropic Partner that modernizes US industrial businesses.

getsetanta.com

Where would this show up in your business?

The Operating Diagnostic looks at how your team works today and where Claude would move your numbers first.